fbpx

5 possible reasons of seepage problem in your bathroom & toilet

waterproofing bathroom

Walls and floors in wet areas around the house like the bathrooms and toilets are susceptible to mold and mildew. This all-too-common phenomenon is not only aesthetically displeasing on account of staining and spores but it is also something which causes subtle structural damage. The easy solution to this is suitable waterproofing. If you put in a barrier between the wet space and the walls and the floor by waterproofing, most of your qualms will be quelled.

Waterproofing  is  a  moisture-proof  barrier  around walls, floors and fittings in your bathroom which act as a wall of defense thereby protecting the structural integrity of your house. Water damage is one of those unavoidable problems that homeowners face all the time  as  it  happens either due  to  the  elements of nature like the rain and the snow or due to pipe leakages.

You are helpless against the elements but a leaky bathroom can be caused by several different factors like a rip in the waterproof lining of the room, old fittings and fixtures, faulty pipes and plumbing, damaged flooring, damaged wall tiling, silicone that has started to wear away.

Effective factors that affecting to water seepage happening.

1.  Mold and mildew – They spawn in moist, warm places If   your   bathroom   isn’t   cleaned   properly regularly or if excess moisture is clinging to your walls, these spurs will prop up in inconvenient places around the areas where the leak exists.

2.  Damaged paint or wallpaper – Your paint or wallpaper will peal either due to weathering or unceremonious leakages.

3.  Damaged floors – This won’t be that big of an indicator as watertight floors and walls can contain a lot of liquid for  a  long  time. If  your house’s tiling  is  cracking, stained, or perhaps your timber is buckling, you could have a water leakage issue.

4.  Ceiling stains – Dark colored moist patches on the ceiling or the corresponding wall are a very apparent sign of water damage.

5.  Dank and damp smells – Mildew and mold spores grow around moisture and they give off a funky, rank odor.  Also  smell  for  notes  of  dampness and  dank smells.

The second thing is to fix the issue that is waterproofing. Start by looking for any cracks in the floor and the walls. Do basic DIY chemical treatments to ensure that the area you are waterproofing is free of any mold or growths that may have occurred. Make a  simple  solution  of  baking  soda  and  vinegar  to remove the pesky spores. Once the area is  clean, remove all the damaged bits (if any) and apply the waterproofing mix. The membrane between the walls and the plaster within a bathroom is particularly essential for structural integrity and stability. Then seal the waterproofed walls and ceiling completely. Then call a contractor to retile your ceramic abode.

20Micron’s most adept product, Micronsil 30C +  is considered as one of the best products in the market for the quality and durability of waterproofing it facilitates. It is a hydrophobic admixture which can efficiently create permanently waterproofed concrete for Plaster, Slab and other masonry work applications. In fact, admixtures have become an integral part of the concrete mix design. Micronsil is easier to use when compared against surface applied waterproofing membranes. It increases the durability of concrete, lowers its water permeability and just completely stops the  moisture  from  collecting  around  inopportune places. It also works against seepage and moisture ingress allows  unhygienic conditions to  prevail and thereby deteriorate the building.

Micronsil 30C+ Benefits:

  • Save up on money, water and electricity as there is no curing process required whatsoever.
  • The waterproofing will reduces the temperature of the walls and the ceiling by about 3⁰C.
  • The waterproofing will make your structure moisture proof.
  • There is no additional cement required for polishing.
  • It reduces the load of the slab and the terrace.
  • Savings galore as it will trim down your budget by
  • 30% and a further 10% as you also save on re-bounce material.
  • It is environment friendly.
  • It is also very effective in controlling immediate water leakage issues.

How to use:

To use our user-friendly product, simply follow the simple measurement ratio:

****(Dry mix + 25 kg Micronsil 30C+) per bag of cement

micronsil 30c+

Tagged , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *